High quality HG50 tube mill equipment for sale

High frequency welding is also called high frequency induction heating. It is the use of 10~500KHz high frequency current flowing through the metal connecting surface resistance heat and applied (or not applying) pressure in order to reach a welding method of metal binding.Shijiazhuang great wall have high quality HG50 tube mill equipment for sale

HG tube mill equipment

Basic information:
1) Material: carbon steel, alloy steel
2) Mechanical properties: σB≤520mpa; σS≤340mpa
3) Coil ID: φ470-φ510mm
4) Coil OD: φ900-φ1800mm
5) Coil weight: ≤3 tons
6) Width: 40-200mm
7) Installed capacity: approx. 350KW
8) Compressed air capacity: 2m3/min    4-7Kg/cm2
9) Water consumption: 20tons/hr
10) Water consumption for high frequency: 30tons/hr
11) Workshop: height(5M min)(from crane to floor) x width(8M) x length(50M min). Two sets of 5 tons overhead crane are recommended.

Finished product:                                                                              
1) Round pipe: φ16-φ63.5mm
2) Square pipe: 50×50 mm Max
3) Rectangular pipe: 40×60mm Max
4) Wall thickness: 0.8-3.0mm (round pipe); 0.8-2.5mm (square, rectangular pipe)

Production flow:                                    
uncoiling → cutting and welding → accumulator → forming, HF welding, deburring, cooling, sizing, straightening → flying saw → runout table, discharge unit → packing → weighing → marking → storage

This article comes from http://www.greatwall-machinary.com/Product/