steel tube production line

The steel tube production line is intended for manufacturing of round pipe of Φ16mm-Φ50mm with thickness of 0.5mm-2.2mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.Finished product will be of round, square or rectangular pipe.

 steel tube production line

The  production flow
{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→
Cage loop→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ Removing External and burr Machine→→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table

Steel Pipe Specification
1. Pipe diameter: Ø16-Ø50mm
2. Pipe Thickness: 0.5- 2.2mm
3. Square Pipe: 13X13mm -40X40mm
4. Rectangle Pipe: 10X20mm -30X50mm
5. Pipe Thickness:  0.5 - 1mm
6. Pipe Length:  6-9m
7. Length Tolerance:0-6mm

This article comes from http://www.greatwall-machinary.com/news/